The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Meraki MR 802.3at PoE Injector (Plug not included)

Meraki MR 802.3at PoE Injector (Plug not included)

No reviews yet Write a Review
$201.92 (Save $69.69)
CAD $132.23
Lease from CAD $ / month
SKU:
MA-INJ-4
Availability:
Hardware drop-shipped by Cisco Meraki, typically ships in 3 to 5 business days
Shipping:
Calculated at Checkout
End of Sale Date:
NA
End of Support Date:
NA

Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

Technical Specifications

 

Power

  • Input Voltage: 100 to 240 VAC
  • Input Current: 0.8A maximum
  • AC Input Frequency: 50-60 Hz
  • Maximum Output Power: 30 W
  • Powered device can be up to 100m away from power injector

Data

  • Compatible with 10/100/1000 Mbit/s Ethernet, full duplex

Environmental

  • Operating Temperature: (32 to 104°F (0 to 40°C)
  • Storage Temperature: (-4 to 158°F (-20 to 70°C)
  • Operating Humidity: 5 to 93%

Additional Features

  • Short-circuit protection

Physical Dimensions

  • 6.3” x 2.1” x 1.4” (160 mm x 52.5 mm x 35.5 mm)
  • Weight: 0.46 lb (210 g)

Mounting

  • Mounts to walls (anchors and screws not included)

Compatibility

  • Complies with 802.3at standard
  • Backward compatibility with 802.3af MR-series access points

LED Indicators

  • Input Power
  • Fault
  • Detect/connected to valid 802.3at load

   

Documentation

pdf-icon.png Download 802.3at PoE Injector Datasheet
  

 

Limited 1 Year Manufacturers Warranty